Bosch Dishwasher Error Code E15: Water in Base Trough / Safety Float Switch Activated
The safety styrofoam float switch located in the bottom plastic base trough has detected accumulated water, activating continuous drain pump operation and halting incoming fill.
dishwasher
OEM Certified Technical Diagnostic Tree
Digital Multimeter
Measure Ohms resistance, continuity & line voltage.
Advanced Diagnostic
4 Sequential manufacturer inspection branches.
Sequential Factory Diagnostic Tree
Perform each diagnostic step in order. Disconnect electrical power and turn off utility shutoffs before inspecting wiring or internal mechanical assemblies.
Multimeter Resistance & Continuity Verification
Before replacing any electronic control board or mechanical sensor, disconnect power and measure terminal resistance using a calibrated digital multimeter. Verify continuity (0 ฮฉ) across safety switches and compare sensor resistance against OEM specs in the diagnostic steps below.
Sponge out moisture, dry base trough completely, and proceed to Step 2 to locate leak source.
Proceed to Step 3.
Install Bosch sump repair gasket kit (12005744) or replace door seal gasket (00298534).
Proceed to Step 3.
Replace safety flood microswitch (00611317).
Proceed to Step 4.
Repair harness wiring or replace connector plug.
Replace power control module (11028637).
Verified OEM Replacement Parts
Cross-referenced factory part numbers for Bosch dishwasher error code E15. Always replace defective components with authentic OEM parts to maintain UL safety certification.
| Component Name | OEM Part Number | Manufacturer | Status |
|---|---|---|---|
| Sump Basin Silicone Gasket Repair Kit | 12005744 | Bosch | Direct Fit OEM |
| Safety Float Microswitch | 00611317 | Bosch | Direct Fit OEM |
| Door Perimeter Gasket Seal | 00298534 | Bosch | Direct Fit OEM |
Estimated Repair Cost Ranges: Bosch E15
Repair costs for Bosch dishwashers displaying error code E15 vary based on component damage, accessibility, and whether you self-install or dispatch a local factory-trained technician.
$25 โ $75
Direct OEM replacement part cost (excluding tools, shipping, or diagnostic meter equipment).
$89 โ $149
Standard in-home diagnostic evaluation fee by an independent technician (typically applied toward repair).
$160 โ $310
Typical total job cost including in-home diagnostic, authentic OEM parts, and professional labor (30โ60 mins).
Pricing & Diagnostic Disclosure:
The pricing figures provided above represent broad industry averages based on nationwide market surveys and component replacement requirements. Pricing depends on multiple factors including the specific appliance brand, age, mechanical condition, diagnostic complexity, accessibility, and local labor rates. All independent repair contractors set their own independent rates and fee structures. An in-home diagnostic evaluation by an authorized technician is required to provide an exact written quote prior to any repair work.
Related Symptom Triage Guides for Bosch dishwashers
If your appliance displays code E15 alongside physical operational symptoms, consult our dedicated failure triage flowcharts:
Why Is My Dishwasher Leaking Water onto the Floor?
Why Is My Dishwasher Making a Loud Grinding Noise? Diagnostic Guide
Why Is My Dishwasher Not Cleaning Dishes Properly?
Why Is My Dishwasher Not Dissolving the Detergent Tablet? Causes & Fixes
Looking for Full Dishwasher Repair Procedures?
Explore comprehensive diagnostic mechanics, component resistance curves, and EPA guidelines for Bosch units.
Need In-Home Diagnostic Dispatch for Code E15?
If multimeter testing confirms an internal short, failed heating element, locked motor, or burnt control board on your Bosch dishwasher, connect with an independent certified technician in your city.
Frequently Asked Questions: Bosch E15
What causes Bosch dishwasher error code E15?
The safety styrofoam float switch located in the bottom plastic base trough has detected accumulated water, activating continuous drain pump operation and halting incoming fill.
Can I reset the E15 code by unplugging the dishwasher?
While disconnecting power for 5 minutes may temporarily clear the display control memory, the E15 code will reoccur once the microcontroller detects the mechanical or electrical fault again.
What OEM replacement parts are required for Bosch E15?
Common OEM replacement components include: Sump Basin Silicone Gasket Repair Kit (OEM #12005744), Safety Float Microswitch (OEM #00611317), Door Perimeter Gasket Seal (OEM #00298534).
How much does it cost to fix Bosch dishwasher error code E15?
Professional repair for Bosch dishwasher error code E15 typically averages $160 โ $310 in total (including an estimated diagnostic fee of $89 โ $149 plus labor and authentic OEM components). Sourcing authentic replacement parts yourself costs approximately $25 โ $75. Final prices depend on model specifics, local labor rates, and physical technician inspection.

